Receives and transmits X10 mains power line signals.
An XM10 2-way power line modem is required. See accesssories below.

Converts X10 mains power line signals into RS232/RS485 textstrings, InfraRed, digital outputs, etc.

TT455-RT-238 is recommended by LinTronic.

Operates up to 8 pcs. X10 addresses/devices. Will control On/Off and can adjust light level Up/Down. Offers All OFF and ALL LIGTHS ON.

A switch selects address 1-4 or 5-8. As the switch can be annoying, we recommend you leave it in position 1-4 and let the TT455-RT-238 convert the wanted command into many commands.

Operates up to 8 pcs. X10 addresses/devices. Will control On/Off and can adjust light level Up/Down. Offers ALL OFF and ALL LIGTHS ON.

A switch selects address 1-4 or 5-8. As the switch can be annoying, we recommend you leave it in position 1-4 and let the TT455-RT-238 convert the wanted command into many commands.

LM12 receives X10 signal from the mains power line and control the attached light:
On, Off, Dim, Bright.

For specific light level control or DIN mounting, see LD12.

AM12 receives X10 signal from the mains power line and control the attached device:
On, Off.

For DIN mounting, see AD12.

H: 80 W: 50 D: 65 (mm)

LD11 receives X10 signal from the mains power line and control the attached lights:
On, Off, Dim, Bright, Specific light level (0-90%)

Soft start/stop. Light level memory.

LD11 is recommended by LinTronic.

H: 80 W: 35 D: 65 (mm)

AM12 receives X10 signal from the mains power line and control the attached device:
On, Off.

Override switch for Always Off, Always On, Automatic.

AD10 is recommended by LinTronic.

TM13 receives the RF signal from an X10 RF remote control or an X10 RF motion sensor, and sends the X10 signal onto the mains power line.

Works with:
- MS13, motion sensor
- KR22, Handheld remote control
- SS22, Wall-mounted remote control
- TT455-RT-238 sending X10 IR-RF codes over an TT-IR-RF02

Please read: "What to be aware of when using X10" - click

MS13 detects movement and sends a wireless On command. After an optional timeout periode, it sends an Off command. Can be used to turn on light, alert an sounds/chimer that a person is detected. Can be installed indoors and ourdoors.

Includes a light/dark sensor which can turn on light when it gets dark, and/or turn it off at daytime.

Requires a TM13 to send the wireless signals onto the mains power lines.

Can send signals to the TT455-RT-238 contolling specific light levels all over your home.

Please read: "What to be aware of when using X10" - click

KR22 is used to remote control light and appliance modules.

Requires a TM13 to send the wireless signals onto the mains power lines.

Can send signals controlling light, curtains, garagedoor, * control audio/video equipment On/Off, Mute, etc. (* requires TT455-RT-238).

Please read: "What to be aware of when using X10" - click

SS13 is used to remote control light and appliance modules.
Very slim design and always easy to find when sitting on the wall.

Requires a TM13 to send the wireless signals onto the mains power lines.

Can send signals controlling light, curtains, garagedoor, * control audio/video equipment On/Off, Mute, etc. (* requires TT455-RT-238).

Please read: "What to be aware of when using X10" - click

Sends and receives X10 signals over the mains power lines (PLC)

Connects to TT455-RT-238 by a PhoneCab-001.

XM10 is recommended by LinTronic.

H: 80 W: 35 D: 65 (mm)

Repeats the X10 signal between phases and filters the signals so it does not disturb your neighbour.

For 3 phases, 3 pcs. FD10 is required.

FD10 is recommended by LinTronic.