TRIGGERS ( anything that can be detected by
the -238 ) |
|
|
'B&O BEO5 signal' trigger
The -238 supports the commandset from BEO5. We have enhanced the control possibilites in coopeation with
B&O HQ, USA.
ApplicationNote on Beo5
The -238 may optionally control your computer.
When detecting a B&O signal, the -238 sends a command 801
to the computer. Your HomeAutomation computer/controller like Crestron, Advantage, AMX, etc. and
software/programs. |
 |
|
'B&O BEO4 signal' trigger
The -238 was originally designed to be controlled by the BEO4.
|
|
|
'B&O BEO1 signal' trigger
Alternatively you may use a Bang&Olufsen BEO1 remote control to carry out a limited amount of functions.
ApplicationNote on Beo1
|
 |
|
'B&O Keyring signal' trigger
Alternatively you may use a Bang&Olufsen Keyring remote control to carry out a limited amount of functions. |
 |
|
'APPLE' trigger
The -238 may also be triggered by the NEC codes found in Apple remote controls.
ApplicationNote on Apple remote
|
 |
|
'BOSE' trigger
The -238 may also be triggered by the NEC codes found in BOSE remote controls.
|
 |
|
'Harmony' trigger
The -238 may also be triggered by the Harmony remotes.
Read more
|
 |
|
'LinTronic codeset' trigger
If you are looking for a universal interface to be controlled from for example a
Philips Pronto programmable remote control, using your own dynamic codeset, we have the
solution.
LinTronic have developed an customized infrared 38 KHz codeset for HomeAutomation
installers/programmers and audio/video manufacturers optional use.
Read more. |
 |
|
'Philips RC5' trigger
The -238 may also be triggered by Philips RC5 codes.
|
|
|
'SleepTimer'
trigger
A built-in programmable SleepTimer allows you to set a time in the range from 10
- 90 minutes, which can be used as Trigger when the timer elaps.
Read More |
 |
|
'Variables' trigger - a very usefull tool
Use the value of 10 variables to specify what should happen when a specific variable reach a certain number.
Great for light scenario control (moods) in up to 8 rooms.
|
If variable 1=2 then
If variable 4=7 then
If variable 8=1 then
|
|
'BusCommands'
trigger - an extremely powerful tool
The -238 includes a 2-wire RS485 industrial communication/data bus allowing
communication between up to 32 pcs. -238's all over your home. You can program one -238 to
send a BusCommand Action onto the bus-system, which will act as a BusCommand Trigger on
the listening -238's. The BusCommand can be send to a specific addressed -238 or
broadcasted to all -238's. The receiving -238's can be programmed to perform the same or
different jobs on the same BusCommand trigger.
Read more |
 |
|
'PC
command' trigger
A command from a PC/controller, commanding the -238 to control a specific Action.
Could be a command to send an InfraRed code, turn an output on or off, flash the red led
in the front of the cabinet, control a relay, close curtains, control light, open/close
garagedoor, etc.
Command 039 is often used to
start/exercise/control the Action.
Command Actions are found in our web-based Action/Command
database.
Programmers: See the LinTronic protocol. |
 |
|
'Digital
Input' trigger
Grounding or release of the built-in digital inputs, can be used as Trigger.
Could for example be a magnetic switch monitoring the garagedoor, windows, doors, etc.
When the switch changes a command 908
is send to the computer.
The digital input must be programmed as Standard. See InputOutput. |
 |
|
'Telephone
line' trigger
Detection of the phone line status (Ringing, Conversation, Idle) can be used as
Trigger. Requires that one of the digital inputs is programmed as Telephone and that an
Automutic Telephone Relay is installed.
Read more |
 |
|
'Motion
detector' trigger
Detection of signals from a passive infrared motion detector can be used as
Trigger. Requires that one of the digital inputs is programmed as PIR and that an infrared
motion detector is installed and connected the digital input.
Read more |
 |
|
'X10 trigger'
Detection of X10 signals from the mains power line an be used as Trigger.
Initially we cover HouseCode A - P, Address 1 - 8, Command On or Off, giving a total of
256 X10 triggers. If required later we can add HouseCode A - P, Address 9 - 16, Command On
or Off.
When an X10 command is detected a command
048 is send to the computer.
Read more |
 |
|
'ICPDAS' trigger
If a larger number of input triggers are needed, then detection of an ICDP input
can be used as Trigger. Initially we cover Address 1- 16, Input 1 - 8, On or Off, giving a
total of 256 triggers. ICPDAS modules operate on a 2-wire RS485 industrial bus (standard
in LinTronic TableTop products).
ICPDAS - read more - ApplicationNote: Inputs / Relays
|
icpdas.com |
|
ACTIONS ( anything that can be controlled by
the -238 ) |
|
|
'Computer Programs'
TT455-RT-238 works with a number of computer programs.
More...
|
 |
|
|
'COMPUTER/CONTROLLER'
The TT455-RT-238
will send you an RS232 string on many occasions:
-
When an X10 Power
Line Carrier command is detected
-
When a B&O remote
control signal is detected
-
When a Philips RC5
remote control signal is detected
-
When a NEC remote
control signal is detected
-
When a Keyspan remote
control signal is detected
-
When a LinTronic 38
KHz infrared code signal is detected
-
When a digital input
level change is detected
-
When a TelephoneLine
status change is detected
-
When a passive infrared
motion detector signal is detected
-
and many
more
|
|
|
'RS232/RS485 commands'
We offer control of RS232/RS485 controlled devices:
AUDIO/VIDEO switches (Kramer, Extron, etc.),
CONTROLLERS (AMX, CRESTRON, LINTRONIC),
LIGHT SYSTEMS (LUXOM, LUTRON, CLIPSAL, INTELLIBUS),
PROJECTORS (CANON, EPSON, GEHA, MITSUBISHI, SIM2, SONY, TOSHIBA,
RELAYS (LINTRONIC RELAY 108, ICPDAS),
MOTORS (CLO),
ANALOG 0-10 VOLT OUTPUT (ICPDAS)
TV/SCREEN (LG, NEC, PIONEER, PANASONIC and many more),
To learn which products we support, visit our database - click |
RS232
/ RS485 |
|
'AMX'
Your AMX controller can be controlled by the -238. We offer two command sets for the
NI-series:
RS232 or PROG RS32. |
amx.com
|
|
'CRESTRON'
Your Crestron computer/controller may react to the same Action commands as a PC.
We offer special Crestron solutions. |
crestron.com |
|
'BOSE LIFESTYLE'
Control of a Bose LifeStyle 18, 28, 35, 38 and 48 is an optional action, which
can be enabled as required. We also offer a BOSE-dedicated product called TT455-RT-003.
|
bose.com |
|
|
'InfraRed code'
The -238 will control any audio/video, hometheater, projector, screen,
air-condition, light, curtain, fireplace, elevation bed, etc. which can be decoded and
retransmitted by our current CodeCollection or which can
be learned and saved/embedded in flash memory.
Our web-database in constantly updated and at any time shows you which products/actions
are currently controlled - click |
 TV, DVD, CD,
Amplifier, Video, Radio,
Light, Curtains, etc. |
|
ELEVATION BEDS
.
|
|
|
IPOD PLAYERS
.
|
|
|
'BUSCH-JAEGER -
Intelligent Light System'
Operates on Philips RC5 codes.
Action commands are found under: LIGHT, BUSCH_JAEGER |
busch-jaeger.com |
|
'Clipsal Light System'
by InfraRed
Control of Clipsal Light System can be achieved by sending Clipsal InfraRed codes
to a Clipsal monochrome or color touch screen or by sending RS232 commands to a PCI
module.
IR commands are found under: CLIPSAL, LIGHT IR, C-BUS 5035TX
RS232 commands are found under: CLIPSAL, LIGHT RS232, GROUP 037 ON (etc.)
Our SETUP configuration program lets you generate the RS232 codes required for your needs,
covering all groups, and ramp time/level combinations. |
cispl.com.au |
|
'Conson Light System'
Action commands controlling Conson modules by the Conson databus are found under:
HOMEAUTOMATION, CONSON, CONCEPT 2000
Read more |
conson.dk |
|
'DALI'
Control of DALI is achieved by sending RS232 commands - PDF.
|
|
|
'EIB - Intelligent Light
System'
Can be controlled by relays. |
E I B
|
|
'Futronix'
Can be controlled by InfaRed - Codes |
Futronix.com |
|
'HELVAR'
Control of HELVAR is achieved by sending RS232 commands - PDF.
|
Helvar.com |
|
'iLight'
Control of iLight is achieved by sending RS232 commands - PDF.
|
ilight.nl |
|
'IntelliBus'
Control of light systems using IntelliBus control commands - PDF.
|
intellibus.co.za |
|
'KNX'
Can be controlled by RS232 - PDF.
|
K N X
Zennio.dk |
|
'Luxom Light System'
Control of Luxom Light System can be achieved by sending RS232 commands.
Action commands are found under: LIGHT, LUXOM, RS232. |
luxom.be |
|
'MoodLight'
Action commands/codes depend on your specific system.
|
kluntz.com |
|
'Niko Light System'
Control of Niko can be achieved by sending infrared commands.
|
niko.be |
|
SmartHouse, CarloGavazzi
We control the SmartHouse system fra Carlo Gavazzi.
|
smart-house.dk
|
|
'VELBUS HomeAutomation'
Control of VELBUS
can be achieved by sending RS232 commands - read more.
|
velbus.be |
|
'Vimar Light Dimmers'
Control of Vimar dimmers is achieved by sending IR commands.
|
vimar.it |
|
'Screen'
For example Davision screens. |
|
|
'Screen motors'
We have embedded control of various lifts and motors. |
closystems.com
|
|
'Boley fireplace'
Control of FirePlace.
Note: Due to safety, approval and insurance rules,
it is on your own risc to remote control a fireplace and it might be illegal or against
insurance policy to operate from a HomeAutomation system or any other remote control than
the original. Contact your fireplace supplier for more information.
|
boley.nl |
|
'Gazco fireplace'
Control of FirePlace.
Note: Due to safety, approval and insurance rules,
it is on your own risc to remote control a fireplace and it might be illegal or against
insurance policy to operate from a HomeAutomation system or any other remote control than
the original. Contact your fireplace supplier for more information.
|
Gazco.uk |
|
'Extractor'
ApplicationNote: Eico Extractors
|
 |
|
'Aircon'
Action commands/codes depend on your specific system.
|
 |
|
'Fan'
Action commands/codes depend on your specific system.
|
 |
|
'CodesInFlash'
In case we are unable to decode a particular remote control, we can embed the
codes as learned codes in flash (codestream copied from the remote control). Read more (yellow section).
To learn which "Codes In Flash" products we support, see CodeCollection and look
for CodeSet 760 - click - or visit database - click |
CIF
CodesInFlash |
|
'LinTronic TT455-RT-238 BusCommands'
The -238 includes a 2-wire RS485 industrial communication/data bus allowing
communication between up to 32 pcs. -238's all over your home. You can program one -238 to
send a BusCommand Action onto the bus-system, which will act as a BusCommand Trigger on
the listening -238's. The BusCommand can be send to a specific addressed -238 or
broadcasted to all -238's. The receiving -238's can be programmed to perform the same or
different jobs on the same BusCommand trigger.
BusCommands Action commands are found under:
LINTRONIC, TT455-RT-238, BUSCOMMANDS (BROADCAST OR ADR 1 - 32)
Read more |
|
|
'LinTronic TT455-RT-238 Delay'
Action commands controlling a delay in the -238 is found under:
LINTRONIC, TT455RT238, DELAY - click |
wait x seconds
|
|
'LinTronic TT455-RT-238 Digital Outputs'
Action commands controlling the -238's digital outputs are found under:
LINTRONIC, TT455RT238, OUTPUTS - click
The digital outputs can be used to signal to other electronic devices, or can be used to
control relays - Read more
|
Output 1
On
...
Output 2 Off |
|
'Relays'
Action commands controlling up to 64 relays (8 boards of 8 relays).
Customized settings for optimized control of curtains, blinders, screens, etc: - Read more
To learn which Actions/commands LinTronic offer - click |
 |
|
'Curtains control'
Our RELAY 108 is carefully designed to control curtains: - Read more |
 |
|
'Relays/digital outputs, ICPDAS'
Action commands controlling up to 2.040 pieces of ICPDAS digital outputs/relays
in the 7000-series is found under:
OUTPUT and RELAYS, ICPDAS, ADR ( 1 - 16 )
ICPDAS - read more - ICPDAS - relays ApplicationNote
|
icpdas.com |
|
'0 - 10 volt output, ICPDAS'
Action commands controlling an analog signal in the range from 0 to 10 volts allows you to control light dimmers, fireplaces, etc.
ApplicationNote: 0 to 10 volt
|
icpdas.com |
|
'Customized
software'
We offer customized special solutions:
Examples:
TT455-RX-002, Lutron controller, RS232
TT455-RX-003, Imerge Sound Server controller, RS232
|
Customized
software |
|
'X10'
Action commands controlling X10 Appliance and LightDimmer modules, is found
under:
HOMEAUTOMATION, X10, IR HOUSE ( A - P ), or
HOMEAUTOMATION, X10, IRRF HOUSE ( A - P ), or
HOMEAUTOMATION, X10, PLC HOUSE ( A - P )
X10 - read more |
X10.com |
|
