LinTronic


TT455-RX-002 LUTRON RS232

TT455-RX-002 is a 455 KHz infrared receiver for Bang & Olufsen BEO4 sending out Lutron Ra RS232 commands.

An american customer installing Lutron Light Systems, contacted LinTronic asking for a special software, converting Bang & Olufsen infrared signals into Lutron’s RA commands for RS232, in order to control Lutron lightdimmers.

Ordering and prices

Compact design, 10 x 7 x 4 cm
Nett weight 215 grams

Power requirements, 9 - 15 volt
Minimum 300 mA

ATMEL mega128 microprocessor
455 KHz IR receiver (B&O)
36-40 KHz IR receiver
High-power long-range wide-angle
IR booster, range 10 meters
Low-power infrared output
External data input
Programmable digital outputs
Programmable digital inputs
RS232 computer interface and
RS485 2-wire industrial bus
2400, 9600, 19200, 38400 bps
2-way X10 Power Line Interface
Build-in firmware updater

Built-in B&O InfraRed Receiver - 455 KHz
- Also receives B&O signals on the bus
- external plasma-protected receiver input

External data input from for example:
- InfraRed receivers 455 KHz

RS232 computer interface
- Baudrate 9600,n,8,1 - programmable
- Open protocol

RS485 industrial bus-interface, 2-wire
- Can be used to link devices together
- Connects up to 32 devices
- Adaptive data-collision control

Computer and remote control the programmable digital Output
- Relay for light, garagedoor, etc.

 

Bang&Olufsen InfraRed signals are converted into Lutron RS232 commands

User Guide

B&O Lutron RS232
LIGHT 1 BP,1,TOG
LIGHT 2 BP,2,TOG
LIGHT 3 BP,3,TOG
LIGHT 4 BP,4,TOG
LIGHT 5 BP,5,TOG
LIGHT 6 BP,6,TOG
LIGHT 7 BP,7,TOG
LIGHT 8 BP,8,TOG
LIGHT 9 BP,9,TOG
LIGHT 0 BP,10,TOG
LIGHT Green BP,16,ON
LIGHT Red BP,17,ON
LIGHT Yellow RAISE,<scene>
LIGHT Blue LOWER,<scene>
LIGHT Yellow Off STOPRL
LIGHT Blue Off STOPRL