TT455-RT-238 Universal Signal Converter

Products intro

Ordering and prices

Technical Documentation
English

Pictures

Compact design
10 x 7 x 4 cm
Nett weight 215 grams

Power requirements
9 - 15 volt
Minimum 300 mA

ATMEL mega128 microprocessor
455 KHz IR receiver (B&O)
36-40 KHz IR receiver
High-power long-range wide-angle
IR booster, range 10 meters
Low-power infrared output
External data input
Programmable digital outputs
Programmable digital inputs
RS232 computer interface and
RS485 2-wire industrial bus
2400, 9600, 19200, 38400 bps
2-way X10 Power Line Interface
Build-in firmware updater


Use ONE remote control to control all your audio/video devices, curtains, light, music, garagedoor, etc. and control your home from a computer.

Even if you do not own any other B&O products, there are hundreds of good reasons why we recommend that you invest in a BEO4 /BEO5.

TT455-RT-238 is a universal signal-converter, typically operated by a remote control called the Trigger (Apple, B&O, Bose, LogiTech, Keyspan, NEC, Nevo, Philips, Pronto and more), controlling a wide number of Actions: Audio/video products, amplifiers, cd/dvd players, TVs, flatscreens, projectors, light systems, fireplaces, aircondition, curtains, relays, HomeAutomation programs and much more.

Triggers / Actions - TT455-RT-238 can be controlled by a wide range of Triggers and can control a wide range of Actions. More...

250 Actions - TT455-RT-238 controls up to 250 Actions. The 250 Actions can be shared by your products in any combination. The TT455-RT-238 automatically allocates the memory required to control each product as you design your configuration.

Macro - TT455-RT-238 allows you to control up to 32 Actions by the same Trigger. You can change the sequence and timing and add delays to make it work perfect.

Computer configured - TT455-RT-238 is configured on a PC by means of our free of charge Configurator program. No particular computer skills is required. After configuration you may use TT455-RT-238 as a stand-alone converter. (Configuration on a MAC requires you run a Windows XP licens under Parallels). 

Computer Control - Leaving the TT455-RT-238 connected to the computer, expands the functionality dramatically and practically leaves no limitations. More...

Developers - Our open-source protocol allows your programmers to create software reacting to incoming Triggers and command the TT455-RT-238 to for example transmit IR codes. Furthermore you may software-fix your outgoing commands and adjust the TT455-RT-238's dynamic Memory Map to the individual customers needs. We have dedicated commands for pointing directly into the Memory Map.
Open-Source protocol - ControlAction (command 039) - CodeSet 701 (B&o) - FixedTrigger - More...

BEO1 operation - TT455-RT-238 may be operated from the BEO1. TT455-RT-238 allows the BEO1 to simulate multiple modes: TV, SAT/DTV, DVD, LIGHT, RADIO, CD, etc.

BEO4 optimized - TT455-RT-238 and RELAY 208 are designed for optimal cooperation with the BEO4. In fact we can control more than 50 products in one configuration.

BEO4 NAVI optimized - We also now support the new Light and Control functions.

BEO5 optimized - In cooperation with B&O-USA, TT455-RT-238 and RELAY 108 were enhanced to work with new 20 pcs. Control-code and 40 pcs. Function-codes. This opens for a wide range of new control possibilites. More...

BeoRepeater - TT455-RT-238 optionally receives and re-transmits B&O commands. This allows you to "shoot around corners" where you normally would have no remote control range. Use it to receive a command in one room and re-transmit it in another room.

BeoLink - TT455-RT-238 can send/receive command over the masterlink. Furthermore TT455-RT-238 may react to LINK-commands from your B&O remote to further expand the control options. More...

Open/Hidden installations - Connectors for external IR/DATA receivers and emitters/transmitters, allows the TT455-RT-238 to work in open or closed environments. It may sit openly with your other A/V products or may be hidden in a cabinet. More...

Integrated IR receivers - TT455-RT-238 includes both a 36-40 KHz receiver and a 455 KHz receiver (B&O, AMX, etc.). This allows the TT455-RT-238 to learn/copy/decode codes from your existing remote controls.

InfraRed booster - TT455-RT-238 includes a long-range high-power wide-angle IR booster, capable of transmitting InfraRed signals from a huge variety of remote control code sets. As most manufacturers license an industrial standard code, our CodeCollection covers more than 95% of the markets remote controls and we are constantly adding more.

IR distribution - TT455-RT-238 also includes a low-power IR output allowing you to mount IR emitters on the front of your products, in case these are hidden in cabinets out of the TT455-RT-238's range.

RS232 / RS485 - TT455-RT-238 also supports RS232/RS485 commands for many light systems, projectors, screens, computers, etc. If you wish to control a product by means of RS232 commands, then contact us with the commands/protocol, and we will embed it in the firmware.

Digital Inputs/Outputs - TT455-RT-238 includes digital inputs and outputs allowing you to connect for example a motion detector or telephone relay, to control your light or mute the stereo when the phone is busy or ringing. Furthermore TT455-RT-238 can be triggered by digital outputs from other products, like for example the BeoSystem. More...

Network - TT455-RT-238 includes a long-range 2-wire industrial bus, allowing you to network connect up to 32 pcs. TT455-RT-238's and/or RELAY 108 modules all over your house and let them control each other. Control your sat receiver or the kids room from your bedroom, etc.

Variables - Use the specific value of 10 individual variables, to carry out certain tasks depending on the value (range 0-10). Quick and easy way to control for example the light scenario (mood) of dimmers in up to 8 rooms.

Customized firmware - We often add new functionality when customers or dealers present ideas for new features or in order to solve a specific matter or interface to a new product.

unlimited and free firmware updates - TT455-RT-238 includes a firmware updater ... a socalled BootLoader, capable of installing new/updated firmware holding more features, or even change a TT455-RT-238 into any other of our typenumbers which ensures our customers and dealers, that they don't have to stock or sell outdated devices and that they freely can test or play.

X10 Mains power line interface - TT455-RT-238 includes an X10 mains line modem interface, allowing you control X10 light dimmers (on, off, dim, bright, specific light level 5-95%), relays (on, off). You may also use X10 commands from elsewhere in the house as trigger for the TT455-RT-238, meaning you can for example control audio/video products, computer, etc. by means of X10 transmitters, panels, modules and remote controls. More...

Before you order
QUICK GUIDE
What customers said
Customers pictures
How it works
Triggers and Actions
Open/Hidden installation
Nice to know when ordering

Controls
Amplifiers
CD/DVD players
Harddisk recorders
Sat/Cable decoders
TV's, screens, projectors, curtains, fireplaces, aircon, etc.
See supported Devices

Controls
LightSystems
Conson - Lutron - Clipsal
Luxom - iLight - Helvar
Dali - Velbus - Intellibus
Vimar - Niko - X10 - Gira
Bush-Jaeger - Dynalite - Merten

and much more

Controls
SoundServers
Kaleidascape - Imerge
and more

Controls
your computer
Windows Media Center - MediaPortal - MisterHouse - HomeVision - AutomatedHome - ActiveHome - Meedio - QUIIQ - mControl - Girder - HomeSeer
More... 

ApplicationNotes
Control from computer
More AppNotes...

Software/Firmware
Configurator
CommandList
Memory Map
CodeLearn
BootLoader
DataSampler
SpyWare
ComputerControl
TimerControl

Misc
Inputs/Outputs
2 - wire network
Controls 0 - 10 volt
Scans up to
128 inputs

Controls up to
2.000 relays